The low cost of the Savi Locate Sensor is economically feasible as a single-use device when return logistics are not available. This high-performance sensor is integrated with Savi Visibility software to deliver an affordable, comprehensive view of in-transit assets.
Connectivity · Intelligent · Flexible · Affordable
GPS and Cellular Connectivity
The Savi Locate Long Life Sensor is a low-cost, high performance tracking device designed to monitor worldwide intermodal shipments. Interior sensitive and accurate antennas use GPS technology to keep tabs on your cargo from either outside or inside most shipping containers. When GPS satellites are not in view, cell tower triangulation can provide an approximate location, allowing sensors to report in from almost any region of the globe.
Software Integration and Alerting
Savi Locate sensors are integrated with Savi Visibility, (intransit visibility software) to provide end-to-end supply chain monitoring and tracking. When exceptions to pre-defined threshold conditions occur, sensors send security and environmental status updates and alerts via GSM networks to Savi Visibility. Sensors are programmed to send updates at varying intervals depending on location to optimize battery life.
Flexibility of OTA Updates
Customers enjoy the flexibility of Savi’s OTA (over-the-air) sensor management capabilities. This enables Savi to change configuration parameters and update the configuration on demand. On-board geo-zones provide the ability to autonomously reconfigure reporting intervals based on the sensor’s location. Configurations can be programmed by Savi before shipment or over-the-air once the unit is in the field.
Affordable and Durable
The low cost of the sensor allows it to be economically feasible as a single-use device when return logistics are not an option. The ruggedness of the sensor allows it to be reused many times over if desired. Weatherproof sensors can be attached to the outside of a shipping container, placed within shipping cartons, or affixed to a pallet or asset using double-sided automotive tape, screws, nylon wire ties or an optional magnetic bracket.
Savi Locate Specifications
|LxWxD||15.8cm x 5.4cm x 2.8cm|
|Temperature||-20°C to +70°C (Operating)|
|-40°C to +85°C (Storage)|
|Shock and Vibration||U.S. Military Standards 810F|
|Weatherproofing||Designed to meet IP64|
|Protocol||Cellular Quad band GPRS|
|Location Technology||33 Tracking/99 Acquisition Channels; GNSS (GPS/GLONASS)|
|Location Sensitivity||Tracking: -165 dBM. Cold starts: -147 dBM|
|Location||Cellular Triangulation Backup|
|Hazardous Substances||RoHS Compliant|
|EMC/EMI||FCC Part15, CE|
|Global Certifications||FCC, CE|
|Battery||1200 mAh Lithium Ion Rechargeable Battery|
- Internal cellular and GPS antennas
- GPRS cellular communication
- IP64 weatherproof encasement
- Meets DOT 2016-17 shipping standards
- RoHS Directive 2002/95/EC
- UUEU Safety
- FCC Part 15